Hot Products
01
MINGZHOU® PE W7000S White Masterbatch - Quality Product from China Suppliers and Factory
MINGZHOU® PE W7000S White Masterbatch for Extrusion, Injection, etc.
MINGZHOU® PE W7000S White Masterbatch consists of a high proportion of pigments and thermoplastic resin, well-dispersed plastic colorants. The selected resin has a good wetting and dispersing effect on the colorant and has a good phase to the coloring material, featured by weatherability, heat resistance, migration resistance etc.
| Carrier: | LLDPE |
| Concentration: | 70±2% Titanium Dioxide |
| Compatibility: | PE, PP, etc. |
| Bulk Density: | 1000 - 1100 kg/m³ |
| Moisture Content: | ≤ 0.20% |
Tests are performed according to Chinese standard and based on international standards. Quoted test results should not be used for specification purposes but are typical test values intended for guidance only.
Method of Addition
PE W7000S is designed for ease of dilution and homogeneous mixing, therefore it's suitable for direct addition using automatic dosing units or by pre-blending.
Dosaging Ratio
The amount of PE W7000S added depends on the performance requirements of the final application. Typical addition rates vary from 1% to 20%.
Packaging & Storage
PE W7000S is supplied in regular pellet form packed in 25kg bags and it should be stored in a dry place. Recommended storage life: up to 1 year provided it is stored as directed.
Frequently Asked Questions
What is the carrier resin used in MINGZHOU® PE W7000S?
The carrier resin used in MINGZHOU® PE W7000S is Linear Low-Density Polyethylene (LLDPE), which ensures excellent compatibility with PE, PP, and other thermoplastic materials.
What is the active pigment concentration of this white masterbatch?
PE W7000S features a high concentration of 70±2% Titanium Dioxide, providing excellent opacity, whiteness, and coloring efficiency.
How is the masterbatch added during processing?
It is designed for easy dilution and homogeneous mixing. You can add it directly using automatic dosing units or by pre-blending before extrusion or injection molding.
What is the recommended dosage rate for PE W7000S?
The typical addition rate ranges from 1% to 20%, depending on the specific performance and opacity requirements of your final application.
What are the packaging options and shelf life?
It is supplied in regular pellet form packed in 25kg bags. When stored in a dry place as directed, it has a recommended storage life of up to 1 year.