Black Masterbatch
0102030405
MINGZHOU ® PE B6640 Black Masterbatch Product Information
MINGZHOU ® PE B6640 Black Masterbatch for INJECTION, EXTRUSION, ETC.
| Carrier： | LLDPE |
| Concentration： | 40±2% Carbon Black |
| Compatibility： | PP, PE, ABS, PC, PA, etc. |
| Melting Point： | 130℃ |
| Heat Resistance： | 280℃ |
| Migration： | 5 |
| Light Fastness： | 8 |
| Bulk Density： | 600 - 800 kg/m³ |
| Moisture Content： | ≤ 0.20% |
| MFI 190℃, 21.6KG： | 10 - 20 g/10min |
Tests are performed according to Chinese standard and based on international standards.
Quoted test results should not be used for specification purposes but are typical test values intended for guidance only.
Quoted test results should not be used for specification purposes but are typical test values intended for guidance only.
Method of Addition
PE B6640 is designed for ease of dilution and homogeneous mixing, therefore it`s suitable for direct addition using automatic dosing units or by pre-blending.
Dosaging Ratio
The amount of PE B6640 added depends on the performance requirements of the final application. Typical addition rates vary from 0.5% to 5% masterbatch.
Packaging and Storage
PE B6640 is supplied in regular pellet form packed in 25kg bags and it should be stored in a dry place.
Recommended storage life: up to 1 year provided it is stored as directed.